Product Description:

The MAF160B-0200-FQ-M0-EK0-05-A1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. In automated cells, it drives pumps, conveyors, and process spindles that need sustained torque while cabinet space remains constrained. The motor pairs a 160-frame stator with a B-length lamination stack, and its flange interface allows direct mounting to gear reducers or pump heads. A turnable terminal box on the A-side also helps simplify cable routing in tight enclosures.

The housing is sealed to IP65, which keeps out dust and water jets so the motor can operate near coolant manifolds. Heat generated in the windings is removed by liquid cooling, and coolant enters and exits through a connection thread that accepts a 1/2 inch fitting for integration with industrial chillers. At a rated speed of 2000 rpm, the electromagnetic design maintains nominal torque without exceeding thermal limits. Mechanical attachment uses flange mounting, and the B-length frame helps the motor clear adjacent equipment. The turnable terminal box on the A-side lets power conductors exit left, right, up, or down, and the unit meets the vibration provisions of DIN EN 60034-14.

Axial and radial loads are managed by an A-side fixed bearing at the drive end, while the opposite bearing floats to absorb shaft growth. The output shaft includes a keyway, uses a shaft sealing ring, and leaves the factory balanced with a half key to limit residual vibration to level A. For safe operation, ambient air must stay between 0 to 40 °C. The windings use insulation class F, and code 0200 is the stator winding pattern selected for this speed range. Because the unit ships without a holding brake, applications that require static holding torque should use an external clamp or drive-based torque locking.