Product Description:

The MAF160B-0200-FQ-C0-EP0-35-N1 is manufactured by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled asynchronous housing motor intended for mid-power drive axes in automated machinery. The unit uses a frame size 160 stator with a B-length iron core, and it can be secured by flange or foot mounting to suit base plates and vertical faces. Power enters on the A-side through a rotatable terminal box, while the keyed shaft is factory balanced with its complete key to reduce dynamic runout. Position feedback is delivered by an incremental encoder integrated into the housing.

The stator jackets circulate coolant directly around the winding package, so the motor uses liquid cooling to remove heat without high airflow. Coolant ports use a 1/2 inch connection thread, which allows standard industrial fittings to be installed. The encoder provides 2048 increments per revolution for speed and position feedback, and its electronics accept a 5 V supply from the control cabinet. The motor is supplied without a holding brake, so vertical loads must be secured by mechanical clamping or active inverter torque during power-off conditions. Vibration performance follows DIN EN 60034-14 level A, and the rotor runs on standard bearings intended for general-purpose service.

The motor uses class F insulation, which permits winding temperatures up to 155 °C before thermal damage occurs. The machined housing and radial shaft sealing ring provide an IP65 rating that helps keep dust and water jets away from the stator core. Rated mechanical output is reached at 2000 rpm, and full performance is maintained at ambient temperatures from 0–40 °C when the specified coolant flow is present. The 0200 winding code matches the electrical characteristics expected by compatible Rexroth drive inverters.