Product Description:

The Bosch Rexroth Indramat MAF160B-0200-FQ-C0-EH0-35-N1 is an asynchronous housing motor in the MAF IndraDyn Asynchronous Motors series. It is used in automation systems to drive conveyors, presses, or extruders where heat must be removed through a dedicated liquid circuit instead of ambient airflow. The unit uses the 160 frame class with length code B and is supplied without a holding brake, so the load must be secured by external machine elements or drive torque when power is removed.

The motor reaches a rated speed of 2000 rpm, and that operating speed is supported by liquid cooling, which carries coolant directly along the stator laminations. Rotor position feedback comes from an incremental sensor that delivers 2048 increments per revolution and is powered by 5 V, allowing standard drive controllers to read velocity and position with minimal interpolation. An enclosure rating of IP65 helps prevent dust ingress and water jets from affecting the windings and bearings, so the unit can be mounted close to process equipment without additional covers. The terminal box can swivel, which allows the A-side power connection to exit in the preferred cable direction.

Liquid circulation connects through a threaded pair of ports sized 1/2 inch, which simplifies integration with common industrial hose fittings. The drive shaft is a plain shaft, so torque is transmitted by external clamping or keyed hubs rather than an internal spline, and no shaft sealing ring is installed, which reduces friction when the motor is coupled to closed gearboxes. Class F insulation permits winding temperatures up to 155 °C, while vibration grade A under DIN EN 60034-14 keeps dynamic imbalance within limits for general-purpose machinery. The motor is intended for ambient temperatures from 0 to 40 °C, and it uses flange and foot mounting with a standard bearing set.