4.95 based on 202 reviews

🙶 I have always received exceptional service and support in my many years of working with Wake Industrial. 🙷

MAF160B-0150-FQ-S2-AF0-35-N1 Bosch Rexroth Indramat

Ask for Availability

Preparing your secure checkout page...

The Bosch Rexroth Indramat MAF160B-0150-FQ-S2-AF0-35-N1 is a liquid-cooled asynchronous housing motor from the MAF IndraDyn Asynchronous Motors series. It features a plain shaft with a labyrinth seal and is designed for flange and foot mounting. The motor has an IP65 protection class, operates at a rated speed of 1500 min-1, and supports an EnDat 2.1 single-turn absolute encoder with a 2048 increment resolution.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The MAF160B-0150-FQ-S2-AF0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed as a drive source for automated equipment, the motor converts electrical energy into continuous rotary motion while its sealed housing channels coolant to control winding temperature. This arrangement permits stable torque output under sustained mechanical load, supporting conveyor sections, forming tools, or similar machinery that must run without thermal derating in closed industrial environments.

The unit relies on liquid cooling circulated through a stainless-steel line that terminates in a 1/2-inch connection thread, allowing quick integration into plant chill-water loops. Rotor position is reported by a single-turn absolute encoder that communicates via EnDat2.1; the measuring disc provides 2048 increments per revolution so the drive controller can issue fine velocity and position commands with low feedback latency. The encoder is energized from a 7–12 V supply, and its data channel shares the same connector that carries the power leads positioned on the A-side of the frame. Environmental ingress is limited by an enclosure rating of IP65 combined with a labyrinth shaft seal, so dust and directed water jets do not penetrate the stator cavity. The winding insulation is class F, and the motor is supplied without a holding brake to reduce axial length and service points.

The motor uses flange and foot mounting on a 160 mm frame that meets DIN EN 60034-14 vibration level A. At its rated speed of 1500 rpm, the plain rotor delivers smooth torque to couplings or belt drives, and the plain shaft profile simplifies alignment with standard hubs. Continuous operation is specified for ambient air from 0 to 40 °C. Outside this range, liquid temperature alone cannot prevent insulation stress. Frame length B provides additional stack height for the 0150 winding code, which matches drive modules that can supply the necessary current without exceeding permissible temperature rise.

Bearing Type
Standard
Cooling Connection Type
Connection thread
Cooling Thread Size
1/2 inch
Cooling Type
Liquid cooling
Encoder Interface
EnDat2.1
Encoder Resolution
2048 increments
Encoder Supply Voltage
7-12 V
Encoder Type
Single-turn absolute encoder
Holding Brake
Without holding brake
Insulation class
F
Motor Frame Length
B
Motor Frame Size
160
Mounting Style
Flange and foot mounting
Permissible ambient temperature
0 - 40 °C
Power Connection Position
A-Side
Power Connection Type
Connector
Product Type
Liquid-cooled asynchronous housing motors
Protection class
IP65
Rated Speed
1500 min-1
Shaft Sealing
With labyrinth seal
Shaft Type
Plain shaft
Standard
DIN EN 60034-14
Vibration Level
A
Winding Code
0150
  • MAF160B0150FQS2AF035N1
  • MAF160B 0150 FQ S2 AF0 35 N1
  • maf160b-0150-fq-s2-af0-35-n1

Frequently Asked Questions about MAF160B-0150-FQ-S2-AF0-35-N1:

Q: What type of cooling method does the MAF160B-0150-FQ-S2-AF0-35-N1 use?

A: The MAF160B-0150-FQ-S2-AF0-35-N1 is equipped with liquid cooling, providing efficient temperature control for continuous operation.

Q: What encoder interface and type does the MAF160B-0150-FQ-S2-AF0-35-N1 motor use?

A: This model features an EnDat2.1 encoder interface with a single-turn absolute encoder for precise position feedback.

Q: Where and how is the power connected on the MAF160B-0150-FQ-S2-AF0-35-N1 motor?

A: The power connection for this motor is positioned on the A-side and uses a connector for electrical hookup.

Q: What protection class does the MAF160B-0150-FQ-S2-AF0-35-N1 motor offer?

A: The MAF160B-0150-FQ-S2-AF0-35-N1 has a protection class rating of IP65, making it dust tight and protected against water jets.

Q: What mounting style options are available for the MAF160B-0150-FQ-S2-AF0-35-N1 motor?

A: This motor is mounted using both flange and foot mounting styles, providing installation flexibility depending on the application.


Internal Product Review

  • ‘‘The MAF160B-0150-FQ-S2-AF0-35-N1 is a Bosch Rexroth liquid-cooled asynchronous housing motor with IP65 protection. EnDat2.1 feedback with 2048 increments supports accurate speed control and dependable positioning data. Flange and foot mounting adds installation flexibility, making the motor a strong choice for demanding machine-duty service.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo