Product Description:

The MAF160B-0150-FQ-C0-EQ0-05-N1 motor is built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed for servo-class duty in production cells and test benches, it converts electrical power into precisely regulated torque for pumps, spindles, and material-handling axes. The frame size 160 with length code B gives the housing a consistent footprint for machines built to IEC dimensions, and a standard bearing arrangement supports the radial and axial loads found in continuous-duty operation. This layout suits equipment that uses standardized motor mounting points and long operating cycles.

The unit is a liquid-cooled asynchronous housing motor, and it removes heat through liquid cooling that circulates behind the stator jacket. The coolant circuit terminates in a 1/2 inch connection thread that matches common quick-fit couplings. Rotor position is monitored by an incremental encoder that supplies the controller with 2048 increments per revolution while drawing a regulated 5 V supply. Power conductors enter a terminal box that can be turned through several positions for easier conduit routing, and the enclosure is rated IP65 to block dust and low-pressure water jets.

The winding is optimized for a nominal speed of 1500 rpm, and Class F insulation keeps conductor temperature within allowable limits at that speed. Machine integration is simplified by flange mounting, and power is connected on the A-side so panel layouts remain consistent. The keyed shaft is balanced with the complete key installed, follows DIN EN 60034-14 vibration grade A, and is delivered without a shaft sealing ring to minimize friction. The motor is supplied without a holding brake, and winding code 0150 is used for drive parameter matching. It operates between 0 °C and 40 °C without derating.