Product Description:

The MAF160B-0100-FQ-M2-EH0-35-N4 is an asynchronous motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled asynchronous housing motor, it is installed in automated equipment that requires steady torque while limiting frame temperature. Heat is carried away through internal jackets, allowing the machine builder to mount the unit inside cabinets or densely packed cells without adding external fans.

A standard bearing arrangement supports radial and axial loads, while the frame corresponds to size 160 with a length code B that suits medium-duty drive trains. Installation flexibility is provided by flange and foot mounting, and the power conductors enter on the A-side through a turnable terminal box. Operation is centered on a rated speed of 1000 rpm, so drive controllers can hold constant frequency without overspeeding industrial gearboxes. Thermal management relies on liquid cooling; coolant is introduced through a connection thread sized 1/2 inch, enabling direct hookup to common plant manifolds. The vibration severity is graded as level C, and winding code 0100 is used for this speed-torque relationship.

Encoder feedback is supplied by a multi-turn absolute unit that communicates via EnDat 2.1 and operates on 7–12 V. Position data has a resolution of 2048 increments, giving the control system fine motion granularity during low-speed indexing. Environmental protection is rated at IP65, and insulation class F permits winding temperatures up to 155 °C. The motor is supplied without a holding brake, and the plain shaft is supplied without a sealing ring, so external measures must be used when axial leakage or static holding torque is required. Acceptable ambient temperature ranges from 0 °C to 40 °C. A turnable terminal box simplifies cable entry orientation, and the internal connection thread completes the closed liquid circuit.