Product Description:

The MAF160B-0100-FQ-M2-EH0-35-H3 is produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it is intended to deliver constant mechanical power in industrial automation cells while its coolant circuit transports heat out of the stator. The unit links to driven equipment through a plain shaft and can be fixed to the machine frame with either a flange face or base feet, supporting layouts that follow DIN EN 60034-14 vibration practices.

It operates at a rated speed of 1000 rpm, balancing torque density with the thermal limits of the jacket. Heat is extracted by liquid cooling that enters the 1/2-inch threaded ports and stabilizes winding temperature under load. Position feedback comes from a multi-turn absolute encoder that delivers 2048 increments to a controller through an EnDat 2.1 link powered by 7–12 V. The housing achieves IP65 protection, blocking dust and low-pressure water when gaskets are intact. Power conductors terminate in a turnable terminal box on the A-side, allowing the box to be rotated for the best cable route. Mechanical attachment uses flange and foot mounting, enabling either face or base fastening without additional brackets.

The electrical system carries an insulation rating of class F, matching vibration severity level B and accommodating hot-spot temperatures up to 155 °C. Bearings specified for high-speed operation keep radial displacement low, and the plain shaft is supplied without a sealing ring for users who prefer external labyrinth or contact seals. Frame designation 160B and winding code 0100 identify the stator size and electrical constants, while the design omits a holding brake so static torque must be supplied by the drive or external clamps. Continuous duty is permitted within an ambient range of 0 to 40 °C, beyond which derating or auxiliary cooling becomes necessary.