Product Description:

The MAF160B-0050-FR-C0-RG0-05-N4 belongs to the MAF IndraDyn Asynchronous Motors series manufactured by Bosch Rexroth Indramat. This liquid-cooled housing motor is used in industrial automation where continuous torque, compact dimensions, and reliable thermal control are required. It is suited for conveyors, presses, or test stands that must maintain stable speed under demanding loads.

The motor uses a liquid cooling circuit connected through a 1/2-inch enclosed rapid-action coupling, and this quick-disconnect interface simplifies loop installation. Operating at a rated speed of 500 rpm, the rotor is supported by a standard bearing set for general-purpose duty. A shaft sealing ring protects the plain shaft against coolant or dust intrusion, and the housing meets the IP65 protection class so the stator windings are shielded from washdown spray. Insulation class F permits winding temperatures up to 155 °C, while vibration level C indicates the permissible housing oscillation during service. The right-hand power connector aligns with plant cabling conventions, and motor frame size 160 with frame length code B matches the envelope used with the 0050 winding.

An incremental feedback device provides 2048 increments per revolution and is energized from a stabilized 5 V supply, allowing precise speed regulation by the drive controller at low frequencies. Mechanical integration is by flange mounting, which centers the mass on the driven machine and removes the need for foot brackets, while the plain shaft simplifies coupler selection. The motor has no holding brake, so static torque must be supplied by the drive if axis restraint is needed during power-off. Operation is permitted within an ambient temperature range of 0 to 40 °C, helping maintain coolant viscosity and insulation resistance.