MAF160B-0050-FQ-C0-LG0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911373742
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF160B-0050-FQ-C0-LG0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous motor features flange mounting, a standard bearing type, and a frame size of 160 with frame length B. It is equipped with an incremental encoder offering 2048 increments of resolution and operates at a rated speed of 500 rpm. The motor has IP65 protection class, a shaft sealing ring, and follows the DIN EN 60034-14 standard.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF160B-0050-FQ-C0-LG0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled unit, it provides constant torque at low acoustic levels for continuous-duty automation tasks such as extruders, presses, and test stands. The motor integrates into closed-loop drive systems where stable speed control and compact thermal management are required.
This model relies on liquid cooling routed through a connection thread that matches a 1/2 inch coupling, so plant piping can be attached without adapters. Winding code 0050 indicates its electromagnetic setup, and the stator meets DIN EN 60034-14 vibration criteria. Nominal operation is specified at 500 rpm, a speed suited to direct-drive or low-ratio gearbox arrangements. A flange mounting interface supports rigid installation, while the plain shaft and shaft sealing ring keep the lubrication circuit separate from the motor enclosure. Standard bearings accommodate radial forces produced by belt or coupling loads. Power reaches the stator through a left-side connector, helping keep cabling away from service aisles. The aluminum housing has an IP65 rating and is intended for ambient temperatures from 0 to 40 °C without derating.
Feedback is handled by an incremental encoder that delivers 2048 increments per revolution at a supply of 5 V, allowing drive controllers to resolve angle and slip for vector control. The insulation system is classified as F, giving thermal headroom when the frame length B winding operates near peak current. Vibration level A helps limit transmitted oscillations to adjacent machinery. The motor is assembled without a holding brake, reducing mass on the 160-size frame and simplifying coolant routing. The coolant connection, standard bearing set, and mounting style support one-sided machine access while maintaining low mechanical runout.
Frequently Asked Questions about MAF160B-0050-FQ-C0-LG0-05-N1:
Q: What type and size of cooling connection does the MAF160B-0050-FQ-C0-LG0-05-N1 use?
A: This motor is equipped with a liquid cooling system that uses a 1/2 inch connection thread for efficient temperature control.
Q: What kind of encoder and resolution does the MAF160B-0050-FQ-C0-LG0-05-N1 motor have?
A: The MAF160B-0050-FQ-C0-LG0-05-N1 features an incremental encoder with a resolution of 2048 increments, powered by a 5 V supply.
Q: What is the mounting style of the MAF160B-0050-FQ-C0-LG0-05-N1 asynchronous motor?
A: The flange mounting style allows the motor to be securely fixed for reliable performance.
Q: What is the rated speed of the MAF160B-0050-FQ-C0-LG0-05-N1?
A: The MAF160B-0050-FQ-C0-LG0-05-N1 has a rated speed of 500 1/min.
Q: What protection class does the MAF160B-0050-FQ-C0-LG0-05-N1 offer?
A: This model provides protection class IP65, safeguarding it from dust and water jets.
