Product Description:

The MAF130D-0250-FQ-S2-KH5-05-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for flange mounting on machine frames, it converts drive controller output into continuous rotary motion for automation axes that demand steady torque with minimal thermal drift. A standard bearing set supports the plain shaft, and the housing accepts coolant through a 1/4-inch threaded connection to remove heat during sustained duty cycles. Its housing-style construction also supports direct integration into machinery where predictable thermal performance is needed over long operating periods.

The rotor is optimized for a rated speed of 2500 rpm, matching the 0250 winding code and vibration level A to keep mechanical stress low at full load. Heat is removed by liquid cooling, so output torque remains stable as ambient temperature approaches 40 °C. Axis feedback is provided by a single-turn absolute encoder with EnDat2.1 communication, and the feedback system uses 2048 increments to provide a direct digital position signal to the drive. An electrically clamped holding brake provides 100 Nm of static torque, allowing the shaft to remain locked during power-off conditions or emergency stops. The housing uses frame size 130 and length code D, while the plain shaft has no shaft sealing ring and is best suited to clean installation environments.

An enclosure rating of IP65 protects the internal windings against dust ingress and water jets. Insulation class F supports winding temperatures up to 155 °C, and dynamic balance is checked to DIN EN 60034-14 for smooth operation. The motor can operate in ambient temperatures from 0 to 40 °C without derating. The flange mounting arrangement and standard cooling connection support use with liquid-cooled inverters, and the direct digital feedback allows the connected drive to monitor rotor position during continuous operation.