Product Description:

The MAF130D-0250-FQ-S2-GQ0-35-N1 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. In automated production cells, the motor supplies constant torque while its liquid-cooled stator helps keep frame temperature low, making it suitable for dense machine layouts and heat-sensitive equipment. Its operating style is well suited to systems that must run for long periods while maintaining stable output under changing mechanical load.

This model employs Liquid cooling circulated through a connection thread sized at 1/4 inch, so plumbing can be attached without additional adapters. A turnable terminal box on the left side houses the power feed, allowing the cable to exit in various directions when flange and foot mounting is used. The standard bearing set supports radial and axial loads, and the rotor is balanced with a complete key to minimize residual vibration when the keyed shaft drives couplings or pulleys. Because the shaft is supplied without a sealing ring, external sealing is required to control lubricant leakage. Position feedback is provided through an EnDat2.1 interface that carries a single-turn absolute signal with 2048 increments per revolution. The encoder runs from a supply of 7-12 V, so it can share a low-voltage rail with other sensors. No holding brake is installed, which reduces mass and inertia at the drive end.

The cast housing is rated at IP65, blocking dust ingress and low-pressure water jets, while the winding insulation meets class F limits. The motor reaches a rated speed of 2500 rpm under winding code 0250, and vibration level A keeps operation within the limits of DIN EN 60034-14. Operation is permitted at ambient temperatures from 0 to 40 °C, matching typical machine and cabinet environments. The 130 mm frame with length code D fits machinery that uses the same mounting footprint.