MAF130D-0250-FQ-S2-DL0-35-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911341612
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130D-0250-FQ-S2-DL0-35-N1 is a liquid-cooled asynchronous housing motor from the MAF IndraDyn Asynchronous Motors series. It features a rated speed of 2500 min-1, flange and foot mounting, and an IP65 protection class. The motor includes a single-turn absolute encoder with EnDat2.1 interface and 2048 increments resolution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MAF130D-0250-FQ-S2-DL0-35-N1 liquid-cooled asynchronous housing motor belongs to the MAF IndraDyn Asynchronous Motors series. As an induction motor enclosed in a water jacket, it is intended for machine tools, presses, and other automated stations where high torque must be delivered continuously without overheating. The motor converts three-phase electrical power into controlled mechanical rotation for positioning axes or constant-speed material-handling tasks. The water-jacket housing helps move heat away from the stator during sustained duty, which suits applications that run for long periods at stable load.
Heat is removed by liquid cooling, and the integrated connection thread accepts a 1/4 inch coupling so the coolant loop can be connected without adapters. During operation, the stator windings are protected by an F insulation system, while the housing has an IP65 rating that helps resist dust and low-pressure water spray. At its rated point, the shaft turns at 2500 rpm, a speed matched to the 0250 winding code for balanced voltage and current loading. Rotor position is reported by a single-turn absolute encoder that provides 2048 increments and requires a regulated 7 to 12 V supply. These feedback signals allow the drive controller to maintain a high-resolution speed loop and steady output under variable load.
The motor uses flange and foot mounting on a frame size of 130, and the D length code sets the axial motor length. The shaft has a DIN keyway and is balanced with a half key, keeping residual vibration within level A of DIN EN 60034-14. Standard bearings support the rotor, and no shaft sealing ring is fitted. Power reaches the stator through a turnable terminal box on the right, while feedback is routed through the EnDat2.1 interface. The turnable terminal box helps align conduit runs more cleanly inside enclosures and along fixed cable routes. The motor operates at ambient temperatures from 0 to 40 °C, and because it does not include a holding brake, the load must be secured by external means after power is removed.
