Product Description:

The MAF130D-0250-FQ-S2-AH0-05-N1 is an asynchronous motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed as a liquid-cooled motor unit, it drives automated machinery that requires compact size and consistent thermal behavior. A flange interface allows direct mounting on machine frames so the motor can power conveyors, presses, or handling axes that need steady, controllable rotation.

The motor uses liquid cooling delivered through a 1/4 inch connection thread on the A-side housing. This threaded port simplifies attachment to closed cooling circuits and helps keep the stator temperature stable under heavy load. The built-in single-turn absolute encoder communicates over the EnDat2.1 interface, and its 2048 increments of resolution with a 7-12 V supply range provide fine position feedback to the drive controller without an external power conditioner. Power conductors connect through a sealed connector that also faces the A-side, which helps reduce cable loops in compact panels. Standard bearings support the plain shaft, and the lack of a shaft sealing ring reduces friction during high-speed operation. Frame size 130 and length code D indicate the stator stack dimensions, and winding code 0250 corresponds to the motor's electromagnetic design.

At a rated speed of 2500 rpm, the rotor meets class-A vibration limits, which is useful when the motor is installed on sensitive test fixtures. The enclosure carries an IP65 protection rating, so dust and water jets are kept away from live parts during washdown cycles. Operation is permitted between 0 to 40 °C, and Class F insulation allows the windings to tolerate elevated internal temperatures when ambient air is warm. Compliance with DIN EN 60034-14 confirms the stated vibration performance. Because the motor has no holding brake, static loads require external mechanical restraint when power is removed.