Product Description:

The MAF130D-0250-FQ-M6-HP0-05-A1 is an asynchronous drive unit produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is intended for conveyors, spindles, and other automation axes that require steady torque in a compact installation space. The flange-mounted housing bolts directly to machine frames, and the enclosed design helps protect internal components from dust and fluid splash in industrial environments. As an asynchronous motor, it is well suited to applications that need controlled speed and continuous operation across repeated duty cycles.

The motor uses liquid cooling, and a jacket around the stator connects to plant chillers through a 1/4 inch thread, so heat is removed without external fans. Protection is rated IP65, which helps keep dust and low-pressure water jets away from the windings and internal electrical parts. The motor reaches a rated speed of 2500 rpm, and it uses frame size 130 with length code D, an A-side fixed bearing, a shaft sealing ring, and a keyway for power transmission. The flange-mounted arrangement supports direct alignment with machine structures, while the shaft sealing ring helps limit contaminant entry around the output shaft. A turnable terminal box is mounted on the B-side for power leads, and operation is permitted from 0 °C to 40 °C under insulation class F without a holding brake.

The motor uses a multi-turn absolute encoder that is suitable for hazardous-area motors and supports closed-loop axis control. Its digital interface uses EnDat2.1, provides 2048 increments per revolution, and operates from a 7–12 V supply. A factory-attached cable rated at 15 m supports signal transmission between the encoder and the drive controller on longer axes. The rotor is balanced with a complete key, which helps reduce residual vibration and supports smooth running at operating speed.