Product Description:

The MAF130D-0250-FQ-M6-GP0-05-A1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It serves as a line-powered drive element that converts electrical energy into controllable mechanical torque for automated machinery. Designed for use with frequency inverters and closed-loop feedback, the motor supports accurate speed regulation in material handling, metalworking, and processing equipment. Its asynchronous design makes it suitable for applications that need controlled acceleration, stable running speed, and continuous industrial duty.

The motor reaches a rated speed of 2500 rpm, which suits inverter-controlled operation across a broad working range. Heat is removed by liquid cooling, with coolant routed through a threaded connection to the machine cooling loop. The winding assembly uses insulation class F and winding code 0250, which suits the thermal demands of inverter-fed operation. Position feedback is provided through the EnDat2.1 serial interface with a resolution of 2048 increments, and the encoder accepts a 7 to 12 V supply through a 15 m shielded cable. The motor has an IP65 protection rating, and the permissible ambient temperature range is 0 to 40 °C, helping it operate reliably where dust and light washdown are present.

A fixed bearing on side A locates the rotor axially, and the shaft is balanced with a complete key while also using a keyway and a shaft sealing ring to support coupling installation and smooth operation. The declared vibration level is A in accordance with DIN EN 60034-14. Coolant enters through a 1/4 inch threaded port. The motor uses flange mounting and matches the 130 frame size with D length. A turnable terminal box on the left side helps route power leads, and the design comes without a holding brake, so holding torque must be supplied electrically when needed.