Product Description:

The MAF130D-0250-FQ-C0-HH0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled asynchronous unit, it supplies rotary motion for automated equipment that must maintain steady torque in compact spaces. It is intended for integration into machinery that follows DIN EN 60034-14 vibration limits. This motor format is suited for installations where enclosed mounting space makes air-based cooling less practical.

The motor uses liquid cooling through a connection thread sized at 1/4 inch, allowing heat to be removed without external airflow. An incremental encoder supplies position feedback with 2048 increments of resolution and operates from a 5 V source, supporting precise speed regulation at the rated velocity of 2500 rpm. The winding code 0250 matches this speed class, while the bearing set uses the standard arrangement for the 130 frame size and D length. Power conductors enter on the B-side through a terminal box that can be rotated to suit cabinet layouts. There is no holding brake, so static load retention must be handled by the drive or external hardware. The motor has a plain shaft without a shaft sealing ring, which reduces friction at high speed.

Ingress protection is rated at IP65, so the housing blocks dust and low-pressure water jets commonly found on factory floors. Installation is simplified by flange mounting, and the vibration level is categorized as class A under the referenced standard. Safe operation is specified for ambient conditions from 0 to 40 °C, and the windings use insulation class F to tolerate elevated internal temperatures during continuous duty. The combination of the terminal box connection, liquid-cooling interface, and encoder supply supports use with typical servo-drive systems.