Product Description:

The MAF130D-0200-FR-S2-HH0-35-H1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for industrial automation, the unit converts electrical energy into rotary motion for servo pump stages, test rigs, or spindle drives that need constant torque at medium speed. Its design follows DIN EN 60034-14 for vibration limits and integrates into machines through a combined flange and foot mounting arrangement, allowing straightforward alignment with driven equipment.

The motor reaches a rated speed of 2000 rpm with high-speed bearings that limit frictional losses during continuous duty. Heat generated at this operating point is removed by liquid cooling; coolant is supplied through an enclosed rapid-action coupling that accepts a 1/4-inch connection, so hose changes can be completed without draining the circuit. A protection rating of IP65 keeps the stator windings free from dust and water jets, while insulation built to class F tolerates winding temperatures up to 155 °C. The 130 mm frame size, the D length code, and a plain shaft without a sealing ring simplify coupling to gearboxes, and the terminal-box power interface can be rotated to match cabinet layouts.

Rotor position is monitored by a single-turn absolute encoder that communicates over the EnDat2.1 interface and resolves shaft angle into 2048 increments. Its 7–12 V supply is delivered through the same cable. Because the power leads exit on the B-side of the housing, wiring stays clear of the driven load. Operation is specified for ambient temperatures from 0 °C to 40 °C, and the assembly ships without a holding brake for applications that already employ external clamping devices. A vibration rating of level A limits mechanical oscillation, while the 0200 winding code aligns the stator impedance with standard IndraDrive inverters.