Product Description:

The MAF130D-0200-FR-C0-LH0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It converts electrical power from an inverter into rotary motion for conveyor sections, presses, and other automation axes that require stable torque under continuous load. A flange mounting interface secures the 130-frame stator to machine plates for rigid installation. The motor is supplied without a holding brake, so position holding at standstill must come from the drive or from external mechanical restraints. Its asynchronous design suits variable-speed operation where commanded frequency and current are adjusted to match process demand.

Its thermal management relies on Liquid cooling, and coolant enters the stator jacket through an enclosed rapid-action coupling sized at 1/4 inch. The left-side power connector supports compact cable routing where clearance around the motor body is limited. An incremental encoder supplies feedback with 2048 increments per revolution and operates from a 5 V source, allowing the controller to track shaft position and motor slip. The motor reaches a rated mechanical speed of 2000 rpm, and the enclosure is rated IP65 to resist dust and water jets around the housing. Vibration performance corresponds to level A after balancing, which supports smooth running in continuous-duty applications.

The motor uses a plain shaft for direct coupling to pulleys, hubs, or similar driven elements. Standard bearings support moderate radial loads, while winding set 0200 and insulation class F support prolonged thermal duty within the intended operating range. Permissible ambient temperature is 0 to 40 °C, and vibration behavior follows DIN EN 60034-14. Frame size 130 with length code D sets the motor envelope for installations that need the longer housing, and the shaft is supplied without a sealing ring. The longer housing also requires adequate axial clearance near couplings and coolant lines.