Product Description:

The MAF130D-0200-FQ-S2-RP0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat in the MAF IndraDyn Asynchronous Motors series. Designed for precision drive tasks in automated machinery, the unit combines a 130 frame size and a D length code, giving moderate torque density while remaining compact. Flange and foot mounting options let machine builders place the housing directly on rigid bases or integrate it into existing motor rails. A power connector on the right side simplifies cable routing inside enclosures, and the absence of a holding brake reduces mass in continuous-rotation applications.

Heat is removed through liquid cooling, and the housing carries a threaded coolant port that accepts a 1/4-inch connection so external chillers can be attached without adapters. Under nominal conditions, the motor reaches 2000 rpm, a speed chosen to match standard gearbox ratios and to stay within the 0 to 40 °C ambient temperature range. The windings use class F insulation while the housing maintains an IP65 protection rating that blocks dust ingress and low-pressure water jets. Positional feedback is delivered through a single-turn absolute encoder with an EnDat2.1 interface, and the controller receives high-resolution position data in 2048 increments per revolution for smooth vector control.

The mechanical arrangement follows DIN EN 60034-14, and the rotor is dynamically balanced to grade A with a hub machined for the keyed shaft. The balanced with a complete key condition helps minimize runout when the motor is coupled to gearboxes. A standard bearing set supports the shaft, which uses a sealing ring and a keyway for direct torque transfer. Control electronics feed the single-turn encoder with 7–12 V to maintain clean signal edges during rapid acceleration. The winding code 0200 indicates the electromagnetic design used for this motor.