MAF130D-0200-FQ-S2-HP0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911339704
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAF130D-0200-FQ-S2-HP0-35-N1 Induction Motor is manufactured by Bosch Rexroth Indramat. This motor has a Singleturn absolute encoder , EnDat2.1, with 2048 encoder and a Standard bearing. It also has a Balanced with entire key, with Shaft sealing ring shaft and is not equipped with a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Part of the MAF series of liquid-cooled Asynchronous servo motors, the MAF130D-0200-FQ-S2-HP0-35-N1 is a 2000 rpm motor that has a torque rating of 200 Nm under nominal conditions. This motor has a power rating of 41.9 kW and a current rating of up to 93.9 Amperes when operating under nominal load. The motor is capable of providing 210 Nm of torque when in standstill condition, this mode prevents the shaft from rotating and is fixed in position. The locked rotor or standstill mode is essential for applications such as robotics where the links of a motor need to be steady and in a fixed position. In locked rotor mode condition, the MAF130D-0200-FQ-S2-HP0-35-N1 consumes around 97.5 Amperes of current.
This motor also has a quiet and efficient design as it can provide a torque of 2.51 Nm for every ampere of current and has a noise level rating of 70 dB when standing next to it for up to 1 meter distance. This motor, being liquid cooled, helps it cool down much faster as its thermal time constant is around 15 minutes, allowing it to cool down at an instant. The liquid cooling inlet has a connection connector size of 0.25 inches.
This motor has a robust design and is made from an anodized aluminum block which makes it heavy-duty and weighs approximately 145 kg. The motor is also painted with a black prime coat as it helps it protect from UV light, preventing it from oxidizing and causing the body to corrode over time. It is recommended by the manufacturer to lubricate or perform maintenance on the motor after every 20,000 cycles of use
