Product Description:

The MAF130D-0200-FQ-S2-HH0-35-H3 is an asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled drive, it supplies rotary power to automation axes that run continuously under thermal stress in production lines, test stands, and similar equipment. The motor serves as the electromechanical interface between an inverter and the driven machine element, delivering torque while conforming to dynamic performance demands common in industrial automation.

The motor is a liquid-cooled asynchronous housing unit, and heat is removed through liquid cooling carried to an external circuit via a connection thread on the stator jacket. The hydraulic interface uses a 1/4 inch thread so plant plumbing can be connected without adapters. The rated mechanical speed is 2000 rpm, which matches winding code 0200 and permits continuous operation in ambient temperatures from 0 to 40 °C. A set of high-speed bearings supports the rotor to keep vibration within level B in accordance with DIN EN 60034-14. IP65 protection helps prevent dust ingress and water jets from affecting the housing. The motor uses flange and foot mounting in frame size 130 with length code D, and power is routed through a turnable terminal box located on the B-side. The shaft is a plain type supplied without a shaft sealing ring or a holding brake to simplify coupling and reduce axial length.

The feedback system is a single-turn absolute encoder, delivering 2048 increments of position data over the EnDat2.1 interface. The sensor operates from a 7–12 V supply provided by the drive controller, ensuring clean differential signals even with cabinet-length cabling. Insulation class F on the stator winding supports the elevated internal temperatures that can arise during continuous duty.