Product Description:

The MAF130D-0200-FQ-S2-EQ0-35-V1 is an asynchronous housing motor from Bosch Rexroth Indramat in the MAF IndraDyn Asynchronous Motors series. It is intended for industrial drive axes that need continuous torque in automated machinery with closed-loop speed and position control. The flange-mounted housing and foot provisions allow the unit to be secured in machine frames, and the integrated single-turn absolute encoder provides the feedback needed for accurate closed-loop motion control without an internal holding brake.

The motor reaches a rated speed of 2000 rpm and uses liquid cooling through a connection thread sized 1/4 inch. This cooling circuit, together with reinforced bearings, supports thermal and mechanical stability when the frame size 130 stator and D-length stack operate with winding code 0200 currents. The windings are enclosed in a housing rated IP65, and the terminal box can be turned after installation. Power enters on the A-side, while torque is delivered through a keyed shaft that is balanced with its complete key and runs without a shaft-sealing ring. Flange and foot mounting points follow DIN EN 60034-14 geometry, which helps the motor align with compatible machine interfaces. Rotor motion is measured by an encoder that delivers 2048 increments through the EnDat2.1 digital interface.

The encoder operates from a 7 to 12 V supply and transmits single-turn absolute position data to the drive controller, so homing after power cycles is not required. The turnable terminal box can be oriented to simplify cable routing, and the lack of a holding brake helps reduce rotor inertia during dynamic duty cycles. The insulation class is F, which supports elevated winding temperatures during operation. Continuous service is supported at ambient temperatures from 0 to 40 °C, and running smoothness is graded at vibration level A.