MAF130D-0200-FQ-S2-BH0-35-N3 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384852
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130D-0200-FQ-S2-BH0-35-N3 is part of the MAF IndraDyn Asynchronous Motors series. This liquid-cooled motor features flange and foot mounting, a plain shaft, and offers IP65 protection. It uses a single-turn absolute encoder with 2048 increments and supports an EnDat2.1 interface at 7-12 volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130D-0200-FQ-S2-BH0-35-N3 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. In industrial automation systems, this motor supplies regulated torque to conveyors, spindles, and presses that require continuous rotation under tight thermal control. The unit uses a frame size of 130 and frame length code D, and it can be installed with flange and foot mounting so it can fit in place of conventional air-cooled motors without dimensional changes. Its power connector is located on the B-side to keep the cable route away from coolant fittings.
Under nominal conditions, the shaft turns at 2000 rpm, a speed matched to asynchronous drive inverters. Rotor position is detected by a single-turn absolute encoder that delivers 2048 increments through the EnDat2.1 interface, allowing high-resolution feedback for closed-loop control. The encoder electronics are powered from a stable range of 7–12 V. Thermal energy is removed by liquid circulating through internal channels, and the inlet and outlet use connection threads sized 1/4 inch so standard hydraulic fittings can be used. Standard bearings support the plain shaft, and the motor is supplied without a holding brake or shaft sealing ring to reduce drag during continuous operation.
The housing meets IP65 to block dust intrusion and direct water jets, making the motor suitable for washdown machine zones within an ambient range of 0 to 40 °C. The windings use insulation class F, giving a thermal limit of 155 °C that matches the liquid-cooling layout. Vibration behavior corresponds to level B under DIN EN 60034-14, and rotor balance uses the series standard grade. The stator winding code is 0200, which matches the electrical values used with IndraDrive converters. Installation uses a threaded connector for the three-phase supply, and the flange-and-foot arrangement is paired with DIN-conforming power-on vibration limits.
Frequently Asked Questions about MAF130D-0200-FQ-S2-BH0-35-N3:
Q: What type of cooling does the MAF130D-0200-FQ-S2-BH0-35-N3 motor use?
A: This model features a liquid cooling system with a connection thread type and a 1/4 inch thread size.
Q: What encoder type and resolution does the MAF130D-0200-FQ-S2-BH0-35-N3 motor have?
A: The MAF130D-0200-FQ-S2-BH0-35-N3 is equipped with an EnDat2.1 single-turn absolute encoder providing 2048 increments of resolution.
Q: Is the MAF130D-0200-FQ-S2-BH0-35-N3 supplied with a holding brake?
A: This motor does not include a holding brake.
Q: What mounting options are available for the MAF130D-0200-FQ-S2-BH0-35-N3 motor?
A: The MAF130D-0200-FQ-S2-BH0-35-N3 supports flange and foot mounting styles.
Q: What protection class rating is provided with the MAF130D-0200-FQ-S2-BH0-35-N3 motor?
A: This model meets the IP65 protection class for resistance against dust and water ingress.
