Product Description:

Bosch Rexroth Indramat builds the MAF130D-0200-FQ-S2-AQ0-05-N1 in the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous housing motor is intended for continuous-duty positioning and speed-regulated axes in industrial automation, where heat is removed through the housing instead of by external airflow. It is delivered as a flange-mounted assembly with an A-side power connector, which supports installation inside enclosed machine frames. That arrangement keeps the electrical connection close to the mounting face and helps simplify routing in compact machine layouts.

The motor removes stator losses through liquid cooling and uses a 1/4 inch cooling port for standard hydraulic fittings. The threaded cooling connection helps keep coolant lines secure under vibration during operation. Feedback is supplied by a single-turn absolute encoder with EnDat2.1 communication; the interface transmits position data with 2048 increments and operates from a 7–12 V supply. A standard bearing set supports the rotor, and winding code 0200 uses Class F insulation for a 155 °C winding limit. The motor is supplied without a holding brake, uses a balanced shaft with a complete key, and routes power through an axial connector on the A-side. Because there is no shaft sealing ring, any added protection against fluid ingress must come from the host machine.

Mechanical integration uses flange mounting, and the housing is rated IP65 to help resist dust and low-pressure water jets. Continuous operation at a rated speed of 2000 rpm aligns with vibration grade A in DIN EN 60034-14. Frame size 130 with length code D sets the motor’s stack height and overall axial length, which helps when matching the unit to available installation space. The permissible ambient temperature range of 0 to 40 °C suits most enclosed cabinets. The keyed shaft is supplied without an additional seal, and the connector remains positioned at the flange face on the A-side.