Product Description:

Bosch Rexroth Indramat manufactures the MAF130D-0200-FQ-S2-AP0-35-V1 as part of the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous housing motor is supplied in frame size 130 with frame length code D and is intended for flange or foot mounting in automated machinery. It functions as a torque source for production equipment that benefits from stable operating temperatures through an internal coolant circuit. Its A-side power connector also helps keep cable routing orderly in compact machine layouts and enclosed drive spaces.

The motor uses liquid cooling through a dedicated cooling connection, and the port is cut to 1/4 inch so standard fittings can be attached without adapters. Rotor position feedback is provided through an EnDat2.1 interface that carries data from the single-turn absolute encoder at a resolution of 2048 increments, while the sensing electronics operate from a 7 to 12 V supply. The motor is sealed to IP65, which protects the windings and the balanced shaft against dust ingress and low-pressure water jets during normal industrial use. The winding uses insulation class F, and the encoder housing, shaft sealing ring, and connector housing share the same protection level. Vibration Level A supports smooth running where steady rotation and low mechanical disturbance are important.

The mechanical design uses reinforced bearings and a keyed shaft that is balanced with the complete key to help reduce coupling misalignment forces. The rated speed is 2000 rpm, matched to winding code 0200 for continuous duty when coolant flow is maintained. The motor is supplied without a holding brake, so any holding force must be provided externally when the axis is stopped. Permissible ambient temperature during operation is 0 to 40 °C. The flange interface includes an integral shaft sealing ring, which supports sealed installation at the driven connection.