Product Description:

The MAF130D-0200-FQ-S2-AP0-35-N1 is an asynchronous drive motor manufactured by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. It comes in frame size 130 with length code D, is intended for liquid-cooled operation, and uses a sealed housing for automated machinery. The motor provides controlled rotary motion to industrial axes where heat is removed through a coolant circuit instead of the surrounding cabinet air. Because cooling is handled through the motor housing, the unit is well suited for enclosed machine installations where cabinet airflow is limited.

A rated speed of 2000 rpm sets the motor's normal operating point for matching inverter parameters and gear ratios. The housing carries a protection rating of IP65, so dust and low-pressure water jets do not reach the internal windings. Heat is removed by liquid cooling through a 1/4-inch connection thread on the A-side of the stator. Motion feedback is supplied by a single-turn absolute encoder with 2048 increments, and its digital signals are transmitted over the EnDat2.1 interface using a 7–12 V supply. This feedback arrangement gives the drive direct rotor position data for closed-loop control. Standard bearings and winding code 0200 support operation with matched drive controllers.

Insulation class F permits winding temperatures up to 155 °C, while vibration level A satisfies DIN EN 60034-14 for low mechanical oscillation. The motor can be mounted by flange or foot, and its connector-based power lead exits on the A-side for cleaner cable routing. A shaft sealing ring and a keyway support reliable torque transfer, and the rotor is balanced with a complete key to help limit radial vibration. The motor has no holding brake, so static load retention must be provided by the machine mechanics. Ambient operation is specified from 0 to 40 °C; outside this range, derating or added cooling is required.