Product Description:

The MAF130D-0200-FQ-S2-AH1-35-N1 is an asynchronous induction motor from Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it is intended for drive systems that demand continuous torque in tight enclosures found on presses, material-handling stations, and machining centers. Integrated power, cooling, and feedback connections allow the inverter to regulate rotor current for accurate speed or position control in automated lines. This arrangement keeps the external interfaces grouped in a compact layout, which is useful where machine space is limited and routing paths must stay organized.

Heat is removed by liquid cooling that circulates coolant through an internal jacket, and the ports use a connection thread of 1/4 inch so common fittings can attach directly. The rotor reaches 2000 rpm, a speed matched to winding code 0200 so nominal torque is available before field weakening. Position data travels over an EnDat2.1 link, and the single-turn encoder resolves 2048 increments per revolution to support tight velocity loops. An electrically released brake provides 80 Nm of holding torque to secure vertical axes when power is off. Power arrives on the A-side connector, and the flange and foot mounting arrangement helps align the motor in modular machine frames.

The aluminum housing meets IP65 ingress protection, so it resists dust and water jets during washdown cleaning. The permitted ambient operating range is 0–40 °C, consistent with insulation class F so winding temperature rise stays within thermal limits at rated load. Vibration grade A, the plain shaft without a sealing ring, and the standard bearing set comply with DIN EN 60034-14, allowing direct coupling to gearboxes while maintaining balance quality for continuous duty. All electrical terminations are routed on the A-side through a detachable connector that carries the 7–12 V encoder supply and three-phase stator leads.