MAF130D-0200-FQ-S2-AH0-05-V1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331106
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130D-0200-FQ-S2-AH0-05-V1 is part of the MAF IndraDyn Asynchronous Motors series and uses liquid cooling with a 1/4 inch connection thread. This flange-mounted motor features IP65 protection, reinforced bearings, and a plain shaft without a shaft sealing ring. It includes an EnDat2.1 single-turn absolute encoder with 2048 increments resolution and operates at a rated speed of 2000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130D-0200-FQ-S2-AH0-05-V1 is an asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed as a liquid-cooled unit, it converts electrical energy into steady rotary motion in production cells where heat must be removed through coolant instead of ambient air. The model is typically installed on packaging lines, forming presses, or test stands that benefit from high continuous-duty operation. Its housing-style design also suits installations where airflow is limited and thermal control is handled by the machine cooling circuit.
At a rated speed of 2000 rpm, the rotor operates with winding code 0200 while keeping thermal rise predictable. Position feedback is transmitted through an EnDat 2.1 serial link that supports a single-turn absolute encoder with 2048 increments of resolution, and the feedback circuit is powered by the drive with 7–12 V. Stator heat is removed by liquid cooling, and coolant enters the jacket through a 1/4 inch connection thread on the housing. Reinforced bearings accommodate belt tension or radial load, and the motor uses frame size 130 with length code D. Electrical power is routed through a connector on the A-side, and vibration level A indicates limited displacement at nominal speed.
The motor uses flange mounting, allowing the housing to bolt directly to precision gearboxes or machine plates. Its enclosure is rated IP65, which helps protect the stator against dust and low-pressure water. Thermal durability is supported by Class F insulation, and drive torque is transmitted through a plain shaft that is supplied without a shaft sealing ring to simplify coupling maintenance. Because the motor is supplied without a holding brake, stationary loads must be supported by external mechanical locks or drive torque. Operation is approved between 0 °C and 40 °C ambient, and dynamic behavior complies with DIN EN 60034-14.
Frequently Asked Questions about MAF130D-0200-FQ-S2-AH0-05-V1:
Q: What type of bearing is used in the MAF130D-0200-FQ-S2-AH0-05-V1 motor?
A: This model is equipped with reinforced bearings for enhanced mechanical durability.
Q: What cooling method does the MAF130D-0200-FQ-S2-AH0-05-V1 employ and what is the connection size?
A: The MAF130D-0200-FQ-S2-AH0-05-V1 operates with liquid cooling and uses a 1/4 inch connection thread.
Q: What is the rated speed of the MAF130D-0200-FQ-S2-AH0-05-V1 motor?
A: This motor provides a rated speed of 2000 min-1 for consistent performance.
Q: Which encoder interface and resolution are available on the MAF130D-0200-FQ-S2-AH0-05-V1?
A: The encoder interface supported is EnDat2.1, and the encoder is a single-turn absolute type with 2048 increments.
Q: What is the protection class rating of the MAF130D-0200-FQ-S2-AH0-05-V1?
A: With a protection class of IP65, the MAF130D-0200-FQ-S2-AH0-05-V1 is resistant to dust and low-pressure water jets.
