Product Description:

The MAF130D-0200-FQ-S2-AH0-05-N2 belongs to the MAF IndraDyn Asynchronous Motors series manufactured by Bosch Rexroth Indramat. It is a liquid-cooled asynchronous housing motor intended for integration into industrial automation lines where continuous torque density and tight thermal control are required. By combining an internal water jacket with a compact flange housing, the unit transfers heat directly to a cooling circuit and keeps stator temperatures stable during prolonged duty cycles. This arrangement helps the motor maintain steady performance in enclosed machine sections where heat buildup can reduce output from air-cooled designs.

This model uses a standard bearing arrangement and relies on liquid cooling delivered through a connection thread that accepts a 1/4 inch fitting. The cooling circuit is routed on the A-side where the power leads exit through a connector, minimizing hose and cable overlap. Speed control is referenced to a single-turn absolute encoder that provides 2048 increments through an EnDat 2.1 interface and is energized from a 7–12 V supply. Because the encoder is absolute, the control system can recover rotor position after power cycling without a reference move. The rated speed is 2000 rpm, allowing the drive to match common inverter frequency ranges without field weakening. A plain shaft is supplied without a shaft sealing ring, and the motor comes without a holding brake, so external clamping devices must handle static loads. Protection to IP65 helps keep dust and low-pressure water jets away from internal components, while insulation class F supports the thermal demands placed on the windings.

The housing uses frame size 130 with length code D, and it has winding code 0200 for use with compatible IndraDrive amplifiers. Mounting is through a flange interface that centers the motor precisely on machinery frames, and the power connector groups phases and ground in a single plug. The flange arrangement also helps align the shaft with couplings or gear stages during installation. Operation is specified for ambient rooms between 0 – 40 °C, enabling installation in controlled production halls without additional enclosure cooling.