Product Description:

The MAF130D-0200-FQ-S2-AH0-05-A1 is a liquid-cooled asynchronous motor in the MAF IndraDyn Asynchronous Motors series from Bosch Rexroth Indramat. Built as a flange-mounted housing unit, it couples to an external drive inverter to supply continuous torque for pumps, extruders, or conveyor sections in automated lines. Integrated coolant passages circulate process water through the stator jacket, allowing high thermal loading without external airflow, so the motor can be installed inside sealed machines or densely populated cabinets where fan-ventilated models would overheat.

The machine axis is specified for a rated speed of 2000 rpm during steady production. Liquid cooling removes heat directly from the copper windings, and coolant enters through a threaded port sized at 1/4 inch, simplifying connection to common manifold hardware. Feedback is provided by an EnDat 2.1 digital interface, and the single-turn absolute encoder resolves rotor position into 2048 increments for closed-loop speed and position regulation. The encoder electronics accept a 7–12 V supply range, enabling use with standard servo controllers. An A-side power connector aligns the motor leads with machine wiring, while the unit is delivered without a holding brake so external mechanisms must secure the load when power is removed. A housing classification of IP65 guards internal parts from dust ingress and low-pressure water jets encountered on factory floors.

Within its operating range of 0 to 40 °C, the motor uses insulation class F, allowing conductor temperatures up to 155 °C during intermittent overloads. An A-side fixed bearing supports axial force from coupled gearsets, and vibration grade A under DIN EN 60034-14 limits shaft oscillation for smooth sensor feedback. The drive end uses a plain shaft without a sealing ring, so the mounting interface must remain free of oil spray to maintain the stated lifetime and liquid-cooling efficiency.