Product Description:

Bosch Rexroth Indramat's MAF130D-0200-FQ-M2-BP0-35-N1 is an asynchronous motor in the MAF IndraDyn Asynchronous Motors series. Designed for closed-loop axis control, the unit supplies torque in lines that favor liquid-cooled housings to minimize panel heat. As a liquid-cooled asynchronous motor, it drives conveyors, presses, or test stands where continuous duty and integrated feedback simplify coordination with IndraDrive inverters. The liquid-cooled layout keeps thermal load away from surrounding cabinet components, which is useful in compact machine designs. The motor couples directly to gear sets through a keyed shaft and supports flange or foot mounting.

Heat removal is managed by liquid cooling through a connection thread, and the port uses a 1/4 inch thread so standard fittings can be applied. Frame size 130 and frame length code D set the active core dimensions for this motor. The unit reaches a rated speed of 2000 rpm with winding code 0200. At the output shaft, the rotor is balanced with a complete key, and a shaft sealing ring helps prevent coolant or oil ingress. The housing supports both flange and foot mounting, while the power connector is oriented on the B-side to keep cabling clear of service doors. Standard bearings support axial and radial loads under vibration class A.

Position data comes from a multi-turn absolute encoder that communicates over EnDat2.1 and operates on 7–12 V, giving the drive absolute position feedback without battery backup. Its internal scale resolves 2048 increments per revolution, which supports fine feedback to the inverter for vector control. The stator windings use insulation class F varnish, and the assembly is sealed to IP65 so dust and water jets do not affect operation between 0 °C and 40 °C. Compliance with DIN EN 60034-14 confirms vibration class A. The motor comes without a holding brake, which reduces axial length.