MAF130D-0200-FQ-M2-BG0-35-N3 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911382767
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130D-0200-FQ-M2-BG0-35-N3 is a liquid-cooled asynchronous motor from the MAF IndraDyn Asynchronous Motors series. It features flange and foot mounting, IP65 protection class, and operates at a rated speed of 2000 min-1. The motor comes with a multi-turn absolute encoder with EnDat2.1 interface and a resolution of 2048 increments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130D-0200-FQ-M2-BG0-35-N3 is an asynchronous motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for use with compatible drive controllers, the unit converts electrical energy into regulated mechanical rotation for automated transport, cutting, and positioning modules on production lines. Its construction supports closed-loop feedback, moderate base speed, and installation in machines where footprint and mounting flexibility are important to the equipment layout. The motor is intended for industrial motion tasks that require stable speed control and dependable operation over repeated production cycles.
This liquid-cooled asynchronous housing motor operates at a rated speed of 2000 rpm. Heat is removed through liquid cooling channels fed by a 1/4-inch connection thread, so standardized hoses can be attached without adapters. This cooling method helps manage thermal load where surrounding airflow is limited. Position data come from a multi-turn absolute encoder that provides 2048 increments per revolution and uses a 7–12 V supply. The enclosure has an IP65 rating that blocks dust ingress and low-pressure water jets, while the windings use Class F insulation to tolerate elevated internal temperatures. The motor has frame size 130 with length code D, and power is connected through a dedicated connector.
The digital feedback channel uses the EnDat2.1 interface, allowing high-resolution position exchange with the drive. Power enters on side B, which can simplify cable routing when the motor is installed with flange and foot mounting. This mounting arrangement supports either face mounting or base mounting, depending on the machine layout. The motor has a plain shaft with a sealing ring, and it is supplied without a holding brake. If the load must remain fixed at standstill, holding force must be provided externally. Operation is permitted between 0 °C and 40 °C, vibration grade B is supported by standard bearings, and the design follows DIN EN 60034-14 with winding code 0200.
Frequently Asked Questions about MAF130D-0200-FQ-M2-BG0-35-N3:
Q: What cooling method and connection size does the MAF130D-0200-FQ-M2-BG0-35-N3 motor use?
A: The MAF130D-0200-FQ-M2-BG0-35-N3 motor uses a liquid cooling system, which is connected via a 1/4 inch thread.
Q: What type of encoder and interface are used in the MAF130D-0200-FQ-M2-BG0-35-N3 motor?
A: This model is equipped with a multi-turn absolute encoder with an EnDat2.1 interface and 2048 increments resolution.
Q: What is the allowable operating temperature range for the MAF130D-0200-FQ-M2-BG0-35-N3?
A: The permissible ambient temperature range for this motor is 0 to 40 °C.
Q: What is the protection class rating of the MAF130D-0200-FQ-M2-BG0-35-N3?
A: The protection class of this motor is IP65, providing dust tightness and protection against water jets.
Q: What type of shaft and brake configuration does the MAF130D-0200-FQ-M2-BG0-35-N3 have?
A: This unit features a plain shaft with a shaft sealing ring and does not include a holding brake.
