Product Description:

The MAF130D-0200-FQ-M2-AH0-05-V1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It converts three-phase drive power into continuous rotary motion for automated axes that require high torque density and stable thermal behavior. Used with an inverter-based drive system, it supports precise vector control in packaging machines, material-handling lines, and other industrial equipment where speed and load can change quickly. The housing-style design places the active motor components directly in the machine structure, which helps conserve installation space in tightly arranged systems.

At its nominal operating point, the motor reaches 2000 rpm, which suits common spindle and gearbox ratios in medium- to high-performance motion systems. Stator heat is removed by liquid cooling through a 1/4-inch connection thread, and the motor is permitted to operate in ambient temperatures from 0 °C to 40 °C. Position feedback comes from a multi-turn absolute encoder with 2048 increments per revolution, powered by a 7–12 V supply for accurate speed and position monitoring. Because the encoder is absolute and multi-turn, position data remain available through rotation counting and support controlled startup behavior. The housing is rated IP65 to help block dust and low-pressure water jets, and the windings use F-class insulation for continuous-duty thermal endurance.

A plain shaft simplifies coupling selection, while reinforced bearings support the radial and axial loads produced during operation. This shaft arrangement is useful where couplings, pulleys, or gearbox inputs must be matched to a simple cylindrical shaft end. The motor uses flange mounting, and power is routed from an A-side connector to keep cable runs orderly in compact machine layouts. Encoder communication is handled through EnDat2.1, allowing high-resolution position exchange over a single shielded pair. Frame size 130, length code D, and winding code 0200 indicate the motor geometry and winding layout. The motor comes without a holding brake or shaft sealing ring, and compliance with DIN EN 60034-14 vibration level A helps limit structure-borne noise in precision assemblies.