Product Description:

The MAF130D-0200-FQ-M2-AH0-05-R1 is a liquid-cooled asynchronous housing motor engineered by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It serves as a drive element in automated installations where compact dimensions and stable heat removal are required. Instead of relying on external fans, it circulates coolant through internal passages to carry heat away from the stator windings. This arrangement suits enclosed machine spaces where free air movement is limited and consistent temperature control is important during continuous operation.

The motor uses Liquid cooling, and the coolant passes through a 1/4 inch threaded port that mates with common hydraulic fittings. Motion feedback is provided by a multi-turn absolute encoder through the EnDat2.1 interface, and the encoder operates from a supply of 7–12 V. It resolves rotor position to 2048 increments per revolution, which supports accurate speed and position monitoring by the connected drive. Under rated conditions, the shaft reaches 2000 rpm, and power conductors exit on the A-side through a sealed connector while the flange face supports direct mounting to a gearbox or machine frame.

The housing carries an IP65 rating to resist dust ingress and low-pressure water jets. Operation is permitted in ambient temperatures from 0–40 °C, and the motor does not include an internal holding brake, which keeps the overall length shorter. A plain shaft simplifies coupling in installations where a shaft sealing ring is not required, and any load that must remain fixed at standstill must be held by the drive or external mechanics. Insulation class F supports elevated winding temperatures, and compliance with DIN EN 60034-14 indicates that the motor meets recognized vibration limits while vibration class A aligns it with common industrial balancing practice.