Product Description:

Bosch Rexroth Indramat manufactures the MAF130D-0200-FQ-M2-AH0-05-N1 within the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous motor is intended for continuous-duty axes in industrial automation, where stable torque and reliable thermal control are important during long operating cycles. Flange mounting fixes the unit directly to the drive train, and the motor uses standard bearings, a plain shaft, and an A-side power connector to keep the mechanical and electrical layout straightforward. Position feedback is provided by a multiturn absolute encoder with an EnDat2.1 interface, and the design omits a holding brake to reduce inertia while following vibration level A for smooth operation.

The cooling circuit uses a connection thread sized at 1/4 inch, allowing standard hydraulic fittings to attach without adapters. The stator winding with code 0200 and frame length D supports a rated speed of 2000 rpm, letting the drive provide constant torque at medium machine velocities. The enclosure is rated to IP65, which helps keep dust and water jets away from live parts. Rotor position is resolved into 2048 increments per revolution, and the encoder electronics accept a supply of 7-12 V. Separate routing of feedback and power connections helps limit electromagnetic interference and supports stable signal transmission. The motor has no shaft sealing ring, which reduces friction but is better suited to clean surroundings.

Operation is permitted in ambient temperatures from 0-40 °C, which suits typical indoor industrial conditions when the liquid cooling circuit is operating. Frame size 130 gives the motor a standardized flange interface, and the insulation system uses class F materials to withstand winding temperatures up to 155 °C. Conformance with DIN EN 60034-14 governs vibration behavior during service and helps preserve stable encoder performance. These operating limits support steady use in equipment that requires accurate motor feedback and controlled thermal loading.