MAF130D-0200-FQ-M2-AF1-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911394179
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130D-0200-FQ-M2-AF1-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features liquid cooling with a 1/4 inch connection thread. This flange mounted motor has an IP65 protection class, insulation class F, and a plain shaft with a labyrinth seal. It is equipped with a multi-turn absolute encoder using EnDat2.1 interface, provides a holding torque of 80 Nm, and has a rated speed of 2000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130D-0200-FQ-M2-AF1-05-N1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is used as a drive component in inverter-based systems that supply controlled mechanical output to automated machinery such as transfer lines, packaging modules, and forming stations. By combining torque generation, internal cooling passages, and encoder feedback in one flange-mounted housing, the motor supports accurate speed regulation in applications that run under sustained thermal load. This arrangement also helps keep the installation compact because the cooling and feedback functions are built into the motor body rather than added as separate external devices.
Mechanical alignment is handled by flange mounting, and the stator housing uses frame size 130 with length code D while the three-phase winding uses code 0200. Power is connected on the A-side, and the bearing arrangement uses a standard configuration that supports operation within the vibration limits of DIN EN 60034-14 category A. The coolant circuit connects through a connection thread with a 1/4 inch port, allowing the motor to be tied into a machine cooling loop. Under rated conditions, the rotor runs at 2000 rpm. Motion feedback is provided by a multi-turn absolute encoder with 2048 increments of resolution and EnDat2.1 communication, using a 7 to 12 V supply for signal operation.
For positional holding, the electrically released brake can apply up to 80 Nm of holding torque when the drive is disabled. A labyrinth seal at the shaft exit works with the IP65 enclosure rating to help keep dust and water spray away from the internal windings. The windings use class F insulation, and the motor is intended for ambient air temperatures from 0 to 40 °C during continuous duty. The plain shaft supports direct mechanical coupling, while the connectorized power interface helps keep cable routing orderly in machines that start and stop often during normal production cycles.
