Product Description:

Bosch Rexroth Indramat manufactures the MAF130D-0200-FQ-M0-AH0-05-R1 asynchronous motor as part of the MAF IndraDyn Asynchronous Motors series. It is used in automated lines that require sustained torque while removing heat through the motor housing instead of raising cabinet temperature. In pumps, extruders, or tool heads, it converts three-phase drive output into mechanical rotation that can be controlled by a compatible Rexroth inverter. This arrangement suits industrial processes that need stable speed control and repeatable torque during long operating periods.

The motor uses liquid cooling through an internal jacket and connects to the coolant circuit with a 1/4-inch thread. This threaded connection helps seal the coolant path and keeps process fluid away from electrical components. Electrical power reaches the stator through a connector on the A-side of the housing, so cabling can run parallel to a machine wall and stay clear of nearby moving parts. The motor uses flange mounting, and the drive end has a plain shaft for customer-supplied couplings because no shaft sealing ring is fitted. This shaft arrangement leaves coupling selection open for the driven machine. The rotor is balanced for continuous operation up to 2000 rpm, and position holding during shutdown must be provided externally because the unit is supplied without a holding brake.

The enclosure is rated IP65, which helps block dust ingress and water jets in general plant environments. The windings use Class F insulation, and operation is permitted within an ambient range of 0 to 40 °C. This insulation system supports repeated thermal loading during normal industrial duty. Dynamic behavior is classified as vibration level A in accordance with DIN EN 60034-14, which supports smooth running in equipment with rotating loads. The motor uses frame size 130 with length code D and winding code 0200.