Product Description:

The MAF130D-0200-FQ-M0-AH0-05-N1/S032 asynchronous housing motor is manufactured by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled unit intended to drive axes that require constant torque while keeping the frame temperature low in tightly packed machinery. With a 130 mm frame and D length code, the motor fits into medium-duty packaging lines, transfer systems, and metal-cutting spindles that depend on closed-loop speed control from the connected inverter.

Heat is extracted through liquid cooling, and the coolant reaches the housing through a connection thread specified as 1/4 inch; this arrangement shortens temperature rise during full-load operation. The motor carries an IP65 protection rating, so dust ingress and water jets do not interfere with the bearings or the stator. Nominal operation occurs at 2000 rpm, matching winding code 0200 and permitting stable field-oriented control. Installation is simplified because the stator flange matches standard machine interfaces and supports flange mounting. A plain shaft without a sealing ring transmits torque directly to couplings while eliminating additional friction. The power leads exit on the A-side through a keyed connector, and the standard bearing set keeps vibration within class A limits.

The electrical insulation uses Insulation class F, allowing the windings to endure elevated internal temperatures that may occur during rapid reversals when no holding brake is present. The motor tolerates ambient conditions from 0 to 40 °C, so cabinet air conditioning is not needed in most factory halls. Vibration behavior conforms to DIN EN 60034-14, which helps protect attached precision gearboxes. The lack of a shaft sealing ring means the application must provide external protection against coolant splash on the shaft end. Final alignment is aided by the standard bearing clearance, and the A-side power exit leaves the rear face free for feedback devices.