Product Description:

The MAF130D-0150-FQ-S2-KH0-05-N1 is produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled asynchronous housing motor intended for flange integration into machine frames, where direct fluid circulation removes heat from the stator. In automated lines, it supplies continuous torque to conveyors, extruders, and forming stations that operate at moderate speed while requiring compact thermal management. Its housing-style design lets the motor body fit directly into the machine structure instead of relying on a separate external frame.

Heat is extracted by a liquid cooling jacket that connects through a 1/4 inch thread, so closed-loop coolant circuits can be attached without adapters. The 0150 winding supports a rated speed of 1500 rpm, providing stable velocity for constant-torque loads. Rotor position is returned by a single-turn absolute encoder that communicates over EnDat2.1, and its internal disc delivers 2048 increments per revolution to improve velocity regulation and commutation accuracy. An enclosure rating of IP65 protects the frame against dust ingress and high-pressure water, while flange mounting keeps the plain shaft aligned with driven equipment.

The encoder electronics accept a supply of 7–12 V, allowing some voltage drop along extension leads without loss of feedback operation. Continuous duty is permitted in ambient conditions from 0–40 °C, which suits many enclosed production areas and machine frames. Mechanical vibration remains within class A limits in DIN EN 60034-14, helping reduce bearing stress and transmitted oscillation to coupled gearboxes. The motor uses insulation class F, has no holding brake, and comes with standard bearings and no shaft sealing ring, so external load holding and added sealing must be provided by the surrounding machine when required.