MAF130D-0150-FQ-S2-HP0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911392077
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130D-0150-FQ-S2-HP0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features a liquid-cooled design with a 130 frame size and flange mounting. It has an IP65 protection class, operates at a rated speed of 1500 min-1, and uses an EnDat2.1 single-turn absolute encoder with 2048 increments. The motor includes a connection thread for liquid cooling and a terminal box power connection located on the B-side.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130D-0150-FQ-S2-HP0-05-N1 asynchronous motor is produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it is intended for closed-loop industrial drive systems that require regulated speed and stable torque control. The unit uses flange mounting, and its 130 mm frame with the D length code suits machinery where axial space is restricted. Power leads leave from the B-side terminal area, which helps keep high-current conductors separated from feedback wiring during cabinet routing.
At a rated speed of 1500 min⁻¹, the rotor meets the torque-versus-frequency profile expected in vector-controlled drives. The single-turn absolute encoder delivers 2048 increments of position data, and its 7–12 V supply supports reliable signaling during operation. Insulation built to class F permits winding temperatures up to 155 °C, while the housing seal attains IP65 to protect the motor against dust and water spray. Internal vibration is held within level A, aided by a shaft balanced with a complete key. Winding code 0150 identifies the electrical layout used in the stator, and the motor uses standard bearings to carry radial loads. The turnable terminal box allows cable entry to be oriented without placing unnecessary stress on the lugs, and the motor is supplied without a holding brake, so stopping torque must come from the drive or from external mechanical restraint.
Coolant enters through a 1/4 inch connection thread on the housing, forming the liquid cooling circuit that removes heat from the stator area. The feedback link uses the EnDat2.1 interface, allowing bidirectional transmission of position, alarm, and temperature data over the same connection. Safe operation is specified for ambient conditions from 0 to 40 °C, and a shaft sealing ring helps preserve the enclosure protection when coolant lines are routed nearby. The solid output shaft is machined with a keyway, which provides a direct mechanical connection for couplings and driven components. This shaft arrangement also supports straightforward alignment with mating machine elements.
Frequently Asked Questions about MAF130D-0150-FQ-S2-HP0-05-N1:
Q: What kind of encoder does the MAF130D-0150-FQ-S2-HP0-05-N1 motor have?
A: This model uses a single-turn absolute encoder with 2048 increments and an EnDat2.1 interface.
Q: What is the cooling method and connection type for the MAF130D-0150-FQ-S2-HP0-05-N1 motor?
A: The MAF130D-0150-FQ-S2-HP0-05-N1 uses a liquid cooling system with a 1/4 inch connection thread.
Q: What mounting style is used for the MAF130D-0150-FQ-S2-HP0-05-N1?
A: This motor features flange mounting for installation.
Q: What is the protection class of the MAF130D-0150-FQ-S2-HP0-05-N1?
A: It provides a protection class of IP65 for environmental resistance.
Q: What is the rated speed for the MAF130D-0150-FQ-S2-HP0-05-N1 motor?
A: The rated speed of this motor is 1500 min-1.
