Product Description:

The MAF130D-0150-FQ-S2-BH0-05-N3 is an asynchronous motor manufactured by Bosch Rexroth Indramat and assigned to the MAF IndraDyn Asynchronous Motors series. Built with a liquid-cooled housing design, the unit removes heat through an internal coolant jacket so it can sustain continuous torque in densely packed automation cells. It is a liquid-cooled asynchronous housing motor used to drive conveyor, spindle, or forming axes where stable induction torque is needed under steady or cyclical mechanical loading.

Its rated speed is 1500 rpm, indicating the mechanical rotation available under nominal voltage without field weakening. Heat generated during this duty is carried away by the integrated liquid cooling circuit, and the stator housing contains a 1/4-inch connection thread that couples directly to plant chillers. The feedback system uses a single-turn absolute encoder that delivers 2048 increments of position data over the EnDat2.1 interface, allowing the controller to close speed and position loops. An enclosure rating of IP65 shields the windings and bearings against dust and water jets, so the motor can be installed outside a sealed cabinet. Standard bearings support combined radial and axial loads for the frame size, and power is fed through a coded connector positioned on the B-side.

The stator insulation system is classified as F, so the allowable winding temperature rise corresponds to 155 °C material limits. Operation is specified between 0 to 40 °C, and mechanical balance complies with vibration severity grade B under DIN EN 60034-14. The unit uses flange mounting, while the frame length code D and winding code 0150 identify its electromagnetic package. Because it is supplied without a holding brake and without a shaft sealing ring, external devices must maintain position and protect the plain shaft from coolant or particulate ingress. The encoder receives 7–12 V supply through the same hybrid cable that carries drive power.