Product Description:

The MAF130D-0150-FQ-S2-BH0-05-N2 is an asynchronous housing motor built by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it supplies rotary motion for precision machinery where heat must be removed from a compact frame. Designed for flange mounting into closed frames, it works with IndraDrive inverters and similar controllers to maintain regulated torque and speed on conveyors, test stands, and general automation cells.

At its rated speed of 1500 rpm, the motor removes stator losses through liquid cooling that circulates fluid through a connection thread sized 1/4 inch. This cooling path supports continuous torque without relying on external airflow, and the standard bearings remain thermally stable during prolonged duty cycles. A protection rating of IP65 shields the winding and frame from dust and low-pressure water jets, allowing installation near spray zones. Closed-loop positioning data are delivered by a single-turn absolute encoder with a resolution of 2048 increments, so the connected drive can fine-tune phase current with minimal positional error.

The encoder communicates through the EnDat2.1 interface and is powered by a 7–12 V supply, linking directly to compatible feedback modules. Mechanical output is transferred through a plain shaft without a sealing ring, so any liquid coolant must remain within the stator jacket rather than the output end. Because the design is supplied without a holding brake, braking torque must be provided by the drive or by external actuators. Electrical insulation corresponds to class F, the stator winding uses code 0150 inside a 130 mm frame with length code D, and a B-side connector handles the three-phase power lead while the assembly operates at ambient temperatures of 0 to 40 °C when mounted on the machine flange.