Product Description:

The MAF130D-0150-FQ-S2-AP0-35-N1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is used with an inverter to convert electrical input into continuous rotary motion for industrial automation axes that require steady output and controlled thermal behavior. As an asynchronous motor, it is intended for electronically regulated speed and torque control rather than direct line operation. Coolant circulates through the housing to remove heat from the stator area, which helps limit thermal drift during long operating periods and supports constant-duty service.

At its rated speed of 1500 rpm, the motor can maintain torque without derating in its intended operating range. Coolant enters through a connection thread sized at 1/4 inch, and the enclosure has an IP65 rating to help keep dust and water jets away from internal components. This sealing also helps protect the class F insulated stator from airborne contamination and moisture exposure in industrial settings. A single-turn absolute encoder provides 2048 increments of resolution and operates from a 7–12 V supply. The feedback link uses the EnDat2.1 interface, and the power conductors terminate on the A-side through a locking connector for secure electrical connection.

The mechanical package uses frame size 130, length code D, and winding code 0150. Flange and foot mounting points allow either horizontal or vertical installation, while the keyed shaft and shaft sealing ring support torque transfer and help protect the bearing area. Standard bearings, vibration level A, and balancing with a complete key reduce mechanical oscillation during operation. The motor is supplied without a holding brake, so static loads must be secured by drive torque or an external clamp when the axis is stopped. It is intended for ambient temperatures from 0 °C to 40 °C and follows DIN EN 60034-14 for mechanical vibration behavior.