Product Description:

Bosch Rexroth Indramat builds the MAF130D-0150-FQ-S2-AP0-05-N1 as part of the MAF IndraDyn Asynchronous Motors series. This asynchronous housing motor delivers continuous rotary motion for automated lines and transfers heat to an external coolant loop instead of relying on ambient air. As an induction motor, it is intended for variable-speed operation when paired with a suitable drive. It is built in a flange-mount format so the stator face can bolt directly to machine frames, which supports rigid installation in conveyors, process equipment, and other industrial systems. The connector is located on the A-side for straightforward cable routing, and the motor uses a standard bearing arrangement for general-purpose duty.

Thermal management is provided by liquid cooling, and coolant enters through a 1/4-inch connection thread that fits common plant cooling circuits. This arrangement helps keep surface temperatures under control in enclosed machine spaces where airflow is limited. The motor has a rated speed of 1500 rpm, which suits typical four-pole inverter operation and supports direct coupling to driven rollers or gear stages. The housing has an IP65 rating to resist dust and water jets in demanding industrial areas. Position data is exchanged through an EnDat 2.1 interface, so the connected drive can receive absolute feedback after power-up without a separate homing sequence.

The encoder provides a resolution of 2048 increments and operates from a 7–12 V encoder supply provided by the single-turn absolute feedback system. The shaft is balanced with a complete key, and a shaft sealing ring helps protect internal areas from contamination during operation. The keyed output supports common industrial couplings that must transmit torque without slip. The motor uses Class F insulation to withstand elevated winding temperatures, and it is intended for ambient temperatures from 0 °C to 40 °C with vibration level A according to DIN EN 60034-14. Frame size 130 with length code D matches winding code 0150, three-phase power is routed through a connector, and the unit is supplied without a holding brake.