Product Description:

The MAF130D-0150-FQ-S2-AH0-05-V1 is an asynchronous motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it is intended for automation axes that need steady torque without adding heat to the machine frame. Flange mounting allows direct attachment to gearboxes or machine plates, which supports compact installation in production cells. This arrangement is useful in equipment where motor heat must be carried away through a coolant circuit instead of being released into the surrounding structure. It also suits machines that need dependable rotary output in a confined installation space.

An internal liquid cooling jacket uses a 1/4 inch connection thread, allowing sealed coolant lines to attach directly to the housing. The power feed enters through a connector on the A-side, which helps keep cables clear of the mounting face. Position feedback comes from a single-turn absolute encoder with 2048 increments, and its signal is transmitted over the EnDat2.1 interface with a supply of 7-12 V. The rotor drives the load through a plain shaft without a shaft sealing ring, and the motor is supplied without a holding brake for systems that rely on external locking. The housing has an IP65 rating, which helps protect internal parts from dust and low-pressure water jets.

The motor reaches a rated speed of 1500 rpm and uses reinforced bearings to handle the higher radial forces common in belt or pinion drives. Thermal endurance is supported by insulation class F, which allows the windings to operate at elevated internal temperatures. Continuous service is intended for ambient conditions between 0–40 °C, and vibration level A supports smooth running in precision equipment. Compliance with DIN EN 60034-14 indicates the balance quality used for the plain shaft. This helps maintain consistent mechanical behavior during operation in automated machinery.