Product Description:

The MAF130D-0150-FQ-S2-AH0-05-N1 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It serves as the primary rotary drive in automated machining cells, conveyor modules, and similar motion axes where compact mounting and flange integration are required. The motor is intended for installations that need continual torque within a controlled mechanical envelope. Its flange-mounted housing allows direct attachment to machine plates or gearboxes on a 130 mm frame, and this helps the unit fit defined installation spaces while maintaining stable rotary output under drive control.

This model relies on liquid cooling circulated through a connection thread specified at 1/4 inch. The closed liquid circuit removes heat directly from the stator, which helps full load be maintained in tight cabinets and keeps temperature rise under control during sustained duty. A standard bearing set supports the rotor, and winding code 0150 matches the motor's electrical design. Position feedback comes from a single-turn absolute encoder over the EnDat2.1 interface, with a measuring scale of 2048 increments and a supply range of 7-12 V. With this feedback loop, the drive can regulate shaft speed up to 1500 rpm without overshoot. Power conductors terminate on the A-side through a plug-in connector, and the motor is supplied without a holding brake to reduce moment of inertia.

The housing has an IP65 rating, which protects the motor against dust and water jets. The plain shaft runs in matched tolerances, so a shaft sealing ring is not included. Insulation class F permits winding temperatures up to 155 °C, and vibration level A keeps dynamic forces within DIN EN 60034-14 criteria during operation. Ambient service is limited to 0 to 40 °C to prevent thermal derating. This sealed motor body is suited for equipment areas where moisture exposure can occur during normal industrial use.