Product Description:

The MAF130D-0150-FQ-N0-KL0-05-N1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat and assigned to the MAF IndraDyn Asynchronous Motors series. Designed for industrial automation, it converts electrical energy into shaft power for conveyors, extruders, and other continuously running equipment. Its flange mounting pattern supports direct alignment with driven machinery, and standard rolling-element bearings handle the radial loads commonly seen in compact drive stations. The motor does not include an internal encoder, so it can be used with external feedback devices or in applications that rely on the drive for speed regulation.

Heat is removed through liquid cooling, and a pair of 1/4 inch connection threads route coolant through the stator jacket. This arrangement helps keep winding temperature below insulation Class F during sustained operation. Under rated excitation, the rotor turns at 1500 rpm, which suits applications that need steady torque at moderate speed. The enclosure meets IP65, which helps protect internal parts from dust and water jets in industrial areas. The motor is supplied without a holding brake, so any required load holding must be provided by the drive or by external mechanical hardware.

The 130 housing complies with DIN EN 60034-14, and the motor is assigned to vibration grade A with a half-key balanced rotor for keyed couplings. Ambient operation is permitted from 0 to 40 °C, matching common indoor plant conditions. Because there is no shaft sealing ring, the keyway shaft should be protected from direct coolant spray and similar contamination at the machine interface. The standard bearing arrangement and the D-length housing support stable operation in continuous-duty service, and the winding code 0150 is matched to this motor configuration.