MAF130D-0150-FQ-M2-BH0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911372821
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130D-0150-FQ-M2-BH0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features flange mounting with a plain shaft. This liquid-cooled asynchronous motor has an IP65 protection class, a rated speed of 1500 min-1, and uses a multi-turn absolute encoder with 2048 increments and EnDat2.1 interface. It supports a cooling thread size of 1/4 inch, has insulation class F, and operates at temperatures from 0 to 40 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130D-0150-FQ-M2-BH0-05-N1 is a liquid-cooled asynchronous housing motor supplied by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. It is intended for integrated industrial drive packages where stable speed, efficient heat removal, and protection from airborne debris are required. Within automated lines, the unit converts three-phase electrical input into mechanical rotation by using an internal coolant jacket to maintain operating temperature during prolonged production shifts. Because the cooling circuit is built into the housing, the motor can support continuous industrial duty without relying on external airflow around the frame.
Coolant enters the stator jacket through a connection thread dimensioned at 1/4 inch, which keeps the pipework compact. The housing is prepared for flange mounting, and the 130 frame size with length code D provides adequate stator iron while limiting overhang. A standard bearing arrangement and a plain shaft are specified, but no shaft sealing ring is fitted, so external sealing must come from the machine side. At a rated speed of 1500 rpm, the motor meets vibration level A and may run in ambient temperatures from 0 °C to 40 °C without derating. Its enclosure carries an IP65 rating, all mechanical provisions comply with DIN EN 60034-14, and mains leads latch to a connector positioned on the B-side for straightforward routing.
Position feedback is delivered by a multi-turn absolute encoder that communicates over EnDat2.1 and draws 7–12 V from the drive. With 2048 increments per revolution, the feedback system enables fine velocity trimming and safe homing sequences. Coil insulation follows Class F limits, and the 0150 winding code corresponds to the electrical resistance and leakage inductance selected for rated operation. The motor is supplied without a holding brake, so static loads must be held by the drive or by external clamps. The motor is intended to operate within the stated ambient range and with the liquid-cooling circuit in service.
Frequently Asked Questions about MAF130D-0150-FQ-M2-BH0-05-N1:
Q: What type of cooling does the MAF130D-0150-FQ-M2-BH0-05-N1 motor use and what is the connection size?
A: The MAF130D-0150-FQ-M2-BH0-05-N1 motor utilizes liquid cooling with a 1/4 inch connection thread for efficient heat dissipation.
Q: What kind of encoder and interface are included on the MAF130D-0150-FQ-M2-BH0-05-N1 motor?
A: This model features a multi-turn absolute encoder with an EnDat2.1 interface and a resolution of 2048 increments.
Q: What is the rated speed for the MAF130D-0150-FQ-M2-BH0-05-N1 motor?
A: The MAF130D-0150-FQ-M2-BH0-05-N1 has a rated speed of 1500 min-1.
Q: Is the MAF130D-0150-FQ-M2-BH0-05-N1 equipped with a holding brake?
A: This motor is manufactured without a holding brake.
Q: What protection class rating does the MAF130D-0150-FQ-M2-BH0-05-N1 motor have?
A: The MAF130D-0150-FQ-M2-BH0-05-N1 is built to meet the IP65 protection class for resistance to dust and water.
