Product Description:

The MAF130D-0150-FQ-M2-AH0-05-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a flange-mounted drive without an integrated brake, it delivers continuous rotary motion for machinery that demands constant torque while external actuators handle positioning. Its construction follows DIN EN 60034-14 vibration limits, and the motor integrates into automation lines that receive closed-loop feedback through the internal multi-turn absolute encoder. This layout suits continuous-process equipment and other machines that benefit from stable speed under changing load conditions.

Thermal management relies on liquid cooling routed through a 1/4-inch connection thread on the housing; the coolant circuit removes losses instead of relying on airflow, so the winding temperature stays within the insulation limit. Under nominal excitation, the rotor reaches 1500 rpm, a speed matched to the 0150 winding set and the standard bearing assembly. The enclosure achieves IP65 protection, allowing installation near washdown zones while the plain shaft remains unsealed. Motion feedback comes from an encoder that yields 2048 increments per revolution and streams position data over the EnDat2.1 interface, powered by a 7–12 V supply from the drive controller.

The electrical insulation system is classified as F, giving the windings a 155 °C thermal ceiling that aligns with the 0–40 °C service window. Power is delivered through a right-angle connector located on the A-side of the housing, which helps cable routing in compact cabinets and crowded machine frames. Mechanical output is transmitted by a plain shaft that is supplied without a shaft sealing ring, so external sealing should be used when coupling to oil-filled gearboxes or wet process equipment. Frame length code D, standard bearings, and the flange mounting pattern keep the motor aligned with the intended mechanical envelope.