Product Description:

The MAF130D-0150-FQ-M0-AG0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. In automated plants, it serves as the primary drive element for conveyors, extruders, and forming equipment where continuous torque and compact dimensions are required. The motor is supplied without an integral brake, so stopping and holding functions must be provided by the connected drive system or external mechanics. It is intended to operate with an external frequency inverter, which regulates speed and manages regenerative braking when required. Its asynchronous design suits applications that prioritize robust continuous operation over servo-style positioning.

Heat is removed through Liquid cooling, supplied through a 1/4 inch connection thread machined into the stator jacket. Under rated conditions, the rotor turns at 1500 rpm, a speed that matches common 50 Hz inverter operation while keeping mechanical loading moderate. The windings use F-class insulation, giving thermal endurance up to 155 °C without loss of dielectric strength. Protection reaches IP65, which helps keep dust and low-pressure water jets away from internal components during operation in wet or dirty areas.

The housing is prepared for flange mounting, allowing direct attachment to machine frames or gearboxes. A plain shaft uses a shaft sealing ring to reduce the entry of contaminants and help retain lubricant at the bearing area. The motor is designed for ambient air from 0 to 40 °C, which suits standard industrial spaces without special room conditioning. Internal balancing meets Vibration Level A, limiting transmitted oscillation to connected components. Power enters on the A-side through a keyed connector, and the 130 frame with D length follows DIN EN 60034-14 dimensions for compatibility with many existing machine layouts.